Seagate announces 18TB IronWolf Pro HDD and new IronWolf SSDs for NAS

BY admin September 11, 2020 Technology 4 views

Seagate announced new storage solutions for network-attached storage (NAS) enclosures. The current series of IronWolf mechanical drives top out at 16TB, but if that isn’t enough for your needs Seagate has a new 18TB flagship model that’ll add a further 2TB to your pool. 

Source: Rich Edmonds / Windows Central

Seagate announced new storage solutions for network-attached storage (NAS) enclosures. The current series of IronWolf mechanical drives top out at 16TB, but if that isn’t enough for your needs Seagate has a new 18TB flagship model that’ll add a further 2TB to your pool. This drive is only available as an IronWolf Pro. Normal IronWolf NAS HDDs still cap at 16TB.

The new 18TB IronWolf Pro drive comes with AgileArray firmware, built on top of conventional magnetic recording (CMR) tech. It’s got a super-high 300TB per year workload limit and has a sustained transfer rate of up to 250MB/s. It’s a little pricey, however. In order to add an 18TB drive to your NAS, you’ll need to part with $608.99.

As well as the new 18TB drive, the company also announced new IronWolf Pro 125 and IronWolf 125 SATA SSDs. The latter are more affordable and are better suited to those wanting to increase their NAS storage capacity with speedy drives, while the Pro SSDs have a higher drive write per day (DWPD) rating, power-loss protection and mean time to failure (MTTF) of 2 million hours.

The new IronWolf 125 SSD family is available in 250GB, 500GB, 1TB, 2TB, and 4TB, starting from $62.99. The IronWolf Pro 125 comes in 240GB, 480GB, 960GB, 1.92TB, and 3.84TB, starting from $94.99.

Comments

write your comment.

Your email address will not be published.